LV450R/L
LV500R/L
LV800R/L
LV800AW-TT
LV800RAW
LV1100R/L
LV1400
LV2000MM
- 60° slanted one-piece rigid bed structure
- Realization of high-precision product processing through the reduction of combined thermal displacement
- Decrease in belt damage and vibration in the main shaft by reducing the length of the main shaft belt
- Optimum design for automated response
- Compact design, able to install within a narrow space
Description | Unit | KIT4500 |
---|---|---|
Max Turning Dia | inch | 6.5 |
Max Turning Length | inch | 11.8 |
Chuck Size | inch | 6 |
Driving Method | - | Belt |
Spindle RPM | r/min | 6,000 |
Spindle Output | HP | 20/15 |
Spindle Torque | lbf.ft | 70.5/51.6 |
Travel(X/Z) | inch | 17.7/11.8 |
Rapid Travel(X/Z) | m/min | 30/36 |
Slide Type | - | LM |
No. of Tools | EA | 6 |
Tool Size | inch | 0.8/1.3 |
Milling Tool Speed | r/min |
- 45° slanted one-piece rigid bed structure
- Minimal thermal distortion
- Machine structure designed to maximize productivity
- Best in class rapid traverse rate : 30m/min
- The most reliable high speed servo turret : 0.1sec/step
- Environmental friendly, separate coolant and lubrication design
- Compact design, able to install within a limited space.
- Ergonomic design allows convenient access to chuck and tools
Description | Unit | E160A | E160LA | E160LMA |
---|---|---|---|---|
Max Turning Dia | inch | 11 | 11 | 7.5 |
Max Turning Length | inch | 11 | 20.1 | 17.7 |
Chuck Size | inch | 8 | 8 | 8 |
Driving Method | - | Belt | Belt | Belt |
Spindle RPM | r/min | 4,000 | 4,000 | 4,000 |
Spindle Output | HP | 15/10 | 15/20 | 15/10 |
Spindle Torque | lbf.ft | 47.5/92.9 | 47.5/92.9 | 69.7/126.7 |
Travel(X/Z) | inch | 6.5/13 | 6.5/20.9 | 6.5/18.1 |
Rapid Travel(X/Z) | m/min | 30/30 | 30/30 | 30/30 |
Slide Type | - | LM | LM | LM |
No. of Tools | EA | 10 | 10 | 12 |
Tool Size | inch | 1/1.3 | 1/1.3 | 0.8/1.3 |
Milling Tool Speed | r/min | - | - | 4,500 |
- 45° slanted one-piece rigid bed structure
- Minimal thermal distortion
- Machine structure designed to maximize productivity
- Best in class rapid traverse rate : 36m/min (SE2000A/MA/C/MC)
- The most reliable high speed servo turret : 0.1sec/step
- Box Guideways to handle heavy cutting (SE2000PA/PC)
- Compact design, able to install within a limited space.
- Ergonomic design allows convenient access to chuck and tool
Description | Unit | SE2000A | SE2000MA | SE2000PA | |
---|---|---|---|---|---|
Max Turning Dia | inch | 13.8 | 11.4 | 13.8 | |
Max Turning Length | inch | 11.8 | 10 | 11 | |
Chuck Size | inch | 6 | 6 | 6 | |
Driving Method | - | Belt | Belt | Belt | |
Spindle RPM | r/min | 6,000 | 6,000 | 6,000 | |
Spindle Output | HP | 15/20 | 15/20 |
- Fast and efficient machine to maximize productivity.
- Superior machine structure to produce various products.
- Angular contact ball bearings to maintain high-rigidity and low thermal distortion.
- High rigidity through intensive finite element analysis
- 6" sub-spindle expands cutting capacity and capability (optional)
- Rigid BMT Turret for heavy cutting (machine equipped with live tools)
Description | Unit | L160A | L160MA | L160LA | L160LMA |
---|---|---|---|---|---|
Max Turning Dia | inch | 14 | 12.2 | 14 | 12.2 |
Max Turning Length | inch | 18.1 | 15.3 | 22 | 21.7 |
Chuck Size | inch | 6 | 6 | 6 | 6 |
Driving Method | - | Belt | Belt | Belt | Belt |
Spindle RPM | r/min | 6,000 | 6,000 | 6,000 | 6,000 |
Spindle Output | HP | 15/10 | 15/10 | 15/10 | 15/10 |
Spindle Torque | lbf.ft | 51.6/35.2 | 51.6/35.2 | 51.6/35.2 | 51.6/35.2 |
Travel(X/Z) | inch | 8.7/18.1 | 8.7/15.7 | 8.7/22 | 8.7/22 |
Rapid Travel(X/Z) | m/min | 36/36 | 36/36 | 36/36 | 36/36 |
Slide Type | - | LM | LM | LM | LM |
No. of Tools | EA | 12 | 12 | 12 | 12 |
Tool Size | inch | 1/1.6 | 1/1.6 | 1/1.6 | 1/1.6 |
Milling Tool Speed | r/min | - | 5,000 | - | 5,000 |
- High-speed gantry loader for cycle time reduction
- Split bed prevents vibration transfer
- Symmetrical headstock to prevent thermal distortion
- Box Guideways used on all axis
- Equipped with rigid and reliable servo turrets
Description | Unit | LF1600/ 2SP | LF1600M/ 2SP |
---|---|---|---|
Max Turning Dia | inch | 10.2 | 10.2 |
Max Turning Length | inch | 6.5 | 6.5 |
Chuck Size | inch | 6 | 6 |
Driving Method | - | Belt | Belt |
Spindle RPM | r/min | 4,500 | 4,500 |
Spindle Output | HP | 7.4/10 | 7.4/10 |
Spindle Torque | lbf.ft | 34.6/47.2 | 34.6/47.2 |
Travel(X/Z) | inch | 5.5/6.5 | 5.5/6.5 |
Rapid Travel(X/Z) | m/min | 24/24 | 24/24 |
Slide Type | - | BOX | BOX |
No. of Tools | EA | 2 x 10 | 2 x 10 |
Tool Size | inch | 0.8/1.3 | 0.8/1.3 |
Milling Tool Speed | r/min | - | 4,000 |
- Y-axis turning center enables for various high accuracy processing
- Main spindle equipped with precision angular contact bearings for high rigidity and minimal heat transfer
- Integrated processing through synchronized control of Main and Sub Spindle (L150/200/250SY)
- VDI turret for fast and convenient tool change.
- Box guideways on all axes for heavy duty cutting (L250Y/SY)
- Lubrication unit located in the front allowing for ease of maintenance.
Description | Unit | L150Y | L150SY |
---|---|---|---|
Max Turning Dia | inch | 9.4? | 9.4? |
Max Turning Length | inch | 20.9? | 20.9? |
Chuck Size | inch | 6? | Main 6? |
Driving Method | - | Belt | Belt |
Spindle RPM | r/min | 6,000 | 6,000 |
Spindle Output | HP | 15-Oct | 15-Oct |
Spindle Torque | lbf.ft | 35.2/51.6 | 35.2/51.6 |
Travel(X/Z) | inch | 8.7?/3.1?/21.7? | 8.7?/3.1?/21.7?/29.5? |
Rapid Travel(X/Z) | m/min | 36/10/36 | 36/10/36/30 |
Slide Type | - | LM | LM |
No. of Tools | EA | 12 | 12 |
Tool Size | inch | 0.8?/1.3? | 0.8?/1.3? |
Milling Tool Speed | r/min | 4,000 | 4,000 |
- Large output built-In spindle motor
- High productivity guaranteed with simultaneous utilization of upper and lower turrets
- Robust BMT turret
- Multitasking is possible with the addition of Y axis to the upper turret (TTSY specifications)
- Integrated processing through synchronized control of Main and Sub Spindle
- Design of the hybrid slideway, combining box guideway(X/Y-axis) and roller guideway(Z-axis) (LM1600/1800TT Series)
Description | Unit | LM1600TTS | LM1600TTMS | LM1600TTSY |
---|---|---|---|---|
Max Turning Dia | inch | 9.1 | 9.1 | 9.1 |
Max Turning Length | inch | 27.8 | 27.8 | 27.8 |
Chuck Size | inch | Main 6 | Main 6 | Main 6 |
Driving Method | - | Built in | Built in | Built in |
Spindle RPM | r/min | 6,000 | 5,000 | 6,000 |
Spindle Output | HP | 15/20 | 15/20 | 1 |
Spindle Torque | lbf.ft | 103.2/153.4 | 103.2/153.4 | 103.2/153.4 |
Travel(X/Z) | inch | 6.5/7.7/27.6/28.3/27.6 | 6.5/7.7/27.6/28.3/27.6 | 6.5/7.7/27.6/28.3/3.9 |
Rapid Travel(X/Z) | m/min | 20/20/40/40/40 | 20/20/40/40/40 | 20/20/40/40/40/7.5 |
Slide Type | - | LM | LM | LM |
No. of Tools | EA | 2 x 12 | 2 x 12 | 2 x 12 |
Tool Size | inch | 0.8/1.3 | 0.8/1.3 | 0.8/1.3 |
Milling Tool Speed | r/min | - | 5,000 | 5,000 |
- 45° slanted one-piece high rigidity bed structure
- Least heat distortion, the most stabilized unit structure
- Able to extend, and high productive machine structure
- Unbeatable rapid travel speed: 30m/min
- The most reliable high speed servo turret is adopted: 0.1sec/step
- Environmental friendly, separate coolant and lubrication design
- Compact design, able to install within a narrow space.
- Ergonomic design allows convenient access to chuck and tool
Description | Unit | E160C | E160LC | E160LMC |
---|---|---|---|---|
Max Turning Dia | inch | 11 | 11 | 7.5 |
Max Turning Length | inch | 11 | 20.1 | 17.7 |
Chuck Size | inch | 8 | 8 | 8 |
Driving Method | - | Belt | Belt | Belt |
Spindle RPM | r/min | 4,000 | 4,000 | 4,000 |
Spindle Output | HP | 15-Oct | 15/20 | 1 |
Spindle Torque | lbf.ft | 47.5/92.9 | 47.5/92.9 | 69.7/126.7 |
Travel(X/Z) | inch | 6.5/13 | 6.5/20.9 | 6.5/18.1 |
Rapid Travel(X/Z) | m/min | 30/30 | 30/30 | 30/30 |
Slide Type | - | LM | LM | LM |
No. of Tools | EA | 10 | 10 | 12 |
Tool Size | inch | 1/1.3 | 1/1.3 | 0.8/1.3 |
Milling Tool Speed | r/min | - | - | 4,500 |
- 45° slanted one-piece high rigidity bed structure
- Least heat distortion, the most stabilized unit structure
- Able to extend, and high productive machine structure
- Unbeatable rapid travel speed : 36m/min (SE2000A/MA/C/MC)
- The most reliable high speed servo turret is adopted: 0.1sec/step
- Application of a Box Guide to handle heavy cutting (SE2000PA/PC)
- Compact design, able to install within a narrow space.
- Ergonomic design allows convenient access to chuck and tool
Description | Unit | SE2000C | SE2000MC | SE2000PC |
---|---|---|---|---|
Max Turning Dia | inch | 13.8 | 11.4 | 13.8 |
Max Turning Length | inch | 10.6 | 10 | 10.6 |
Chuck Size | inch | 8 | 8 | 8 |
Driving Method | - | Belt | Belt | Belt |
Spindle RPM | r/min | 4,000 | 4,000 | 4,000 |
Spindle Output | HP | 15/20 | 15/20 | 15/20 |
Spindle Torque | lbf.ft | 67.8/123.1 | 67.8/123.1 | 67.8/123.1 |
Travel(X/Z) | inch | 8.3/13 | 8.3/11.3 | 8.3/12.2 |
Rapid Travel(X/Z) | m/min | 36/36 | 36/36 | 24/24 |
Slide Type | - | LM | LM | BOX |
No. of Tools | EA | 12 | 12 | 12 |
Tool Size | inch | 1/1.6 | 1/1.3 | 1/1.6 |
Milling Tool Speed | r/min | - | 4,500 | - |
- Shortened cycle time to improve productivity.
- Adequate machine structure to produce various products.
- Adopted angular ball bearing to maintain high-rigidity and low heat absortion.
- Strengthened Equipment Sturdiness through Structural Analysis
- Applied BMT turret to cut heavy-duty products (Mill Turret Attachment Machine)
Description | Unit | L230A | L230MA | L230LA | L230LMA | L230LMSA |
---|---|---|---|---|---|---|
Max Turning Dia | inch | 14 | 12.2 | 14 | 12.2 | 12.2 |
Max Turning Length | inch | 17.3 | 14.2 | 22 | 20.5 | 20.5 |
Chuck Size | inch | 8 | 8 | 8 | 8 | Main 8 |
Driving Method | - | Belt | Belt | Belt | Belt | Belt |
Spindle RPM | r/min | 4,000 | 4,000 | 4,000 | 4,000 | 4,000 |
Spindle Output | HP | 20/15 | 20/15 | 20/15 | 20/15 | 20/15 |
Spindle Torque | lbf.ft | 211.2/154.8 | 211.2/154.8 | 211.2/154.8 | 211.2/154.8 | 211.2/154.8 |
Travel(X/Z) | inch | 8.7/17.3 | 8.7/17.3 | 8.7/22 | 8.7/22 | 8.7/22/23.2 |
Rapid Travel(X/Z) | m/min | 36/36 | 36/36 | 36/36 | 36/36 | 36/36/30 |
Slide Type | - | LM | LM | LM | LM | LM |
No. of Tools | EA | 12 | 12 | 12 | 12 | 12 |
Tool Size | inch | 1/1.6 | 1/1.6 | 1/1.6 | 1/1.6 | 1/1.6 |
Milling Tool Speed | r/min | - | 5,000 | - | 5,000 | 5,000 |
- 45° slanted one-piece rigid bed structure
- Minimal thermal distortion
- User-friendly structure for high productivity
- Best in class rapid traverse rate : 30m/min (Z-axis)
- Reliable, high speed servo turret: 0.12sec/step
- Box guide ways for heavy-duty cutting
- Compact design, able to install within a limited space.
- Ergonomic design for convenient access to chuck and tool
Description | Unit | HD2200 | HD2200M |
---|---|---|---|
Max Turning Dia | inch | 15 | 11.8 |
Max Turning Length | inch | 22.2 | 18.4 |
Chuck Size | inch | 8 | 8 |
Driving Method | - | Belt | Belt |
Spindle RPM | r/min | 4,000 | 4,000 |
Spindle Output | HP | 24.8/20.1 | 24.8/20.1 |
Spindle Torque | lbf.ft | 151.9/92.4 | 151.9/92.4 |
Travel(X/Z) | inch | 8.5/22.8 | 8.5/19 |
Rapid Travel(X/Z) | m/min | 24/30 | 24/30 |
Slide Type | - | BOX | BOX |
No. of Tools | EA | 12 | 12 |
Tool Size | inch | 1/1.6 | 1/1.6 |
Milling Tool Speed | r/min |
- Rigid servo turret
- Symmetrical headstock to prevent thermal distortion
- Pretensioned double-anchored ballscrew for superior positioning and repeatability accuracy
- High-speed gantry loader for cycle time reduction
- Split bed prevents vibration transfer
Description | Unit | LF2100/ 2SP | LF2100M/ 2SP |
---|---|---|---|
Max Turning Dia | inch | 14.2 | 14.2 |
Max Turning Length | inch | 6.1 | 6.1 |
Chuck Size | inch | 8 | 8 |
Driving Method | - | Belt | Belt |
Spindle RPM | r/min | 4,000 | 4,000 |
Spindle Output | HP | 15/20 | 15/20 |
Spindle Torque | lbf.ft | 211.7 (Max) | 211.7 (Max) |
Travel(X/Z) | inch | 7.5/6.7 | 7.5/6.7 |
Rapid Travel(X/Z) | m/min | 24/24 | 24/24 |
Slide Type | - | BOX | BOX |
No. of Tools | EA | 2 x 10 | 2 x 10 |
Tool Size | inch | 1/1.5 | 1/1.5 |
Milling Tool Speed | r/min | - | 5,000 |
- Cycle time reducing structure for maximum productivity
- Multi-tasking operation with wedge type Y-axis BMT65P turret
- Integrated processing through synchronized control of Main/Sub spindle
- High performance heavy duty cutting enabled with box guideways
- Improved maintenance through locating lubrication mechanisms on the front of machine
Description | Unit | L2100Y | L2100SY |
---|---|---|---|
Max Turning Dia | inch | 13.2 | 13.2 |
Max Turning Length | inch | 17.8 | 17.8 |
Chuck Size | inch | 8 | Main 8 |
Driving Method | - | Belt | Belt |
Spindle RPM | r/min | 4,500 | 4,500 |
Spindle Output | HP | 15/20 | 15/20 |
Spindle Torque | lbf.ft | 137.5/187.4 | 137.5/187.4 |
Travel(X/Z) | inch | 8.3/3.9/21.3 | 8.3/3.9/22.8/19.7 |
Rapid Travel(X/Z) | m/min | 18/12/24 | 18/12/24/24 |
Slide Type | - | BOX | BOX |
No. of Tools | EA | 12 | 12 |
Tool Size | inch | 1/2.0 | 1/2.0 |
Milling Tool Speed | r/min | 5,000 | 5,000 |
- Cross-type Y-axis spindle enables for various high accuracy processing
- Main spindle with angular ball bearing for high stiffness and low thermal emission
- Integrated processing through implementation of sub spindles (L150/200/250SY)
- VDI tool shelf for fast and convenient tool exchange.
- Front loading box guideway for heavy duty cutting (L250Y/SY)
- Improved maintenance through lubrication mechanism in the front
Description | Unit | L200Y | L200SY |
---|---|---|---|
Max Turning Dia | inch | 9.4 | 9.4 |
Max Turning Length | inch | 20.9 | 20.9 |
Chuck Size | inch | 8 | Main 8 |
Driving Method | - | Belt | Belt |
Spindle RPM | r/min | 4,000 | 4,000 |
Spindle Output | HP | 15/20 | 15/20 |
Spindle Torque | lbf.ft | 155/211.3 | 155/211.4 |
Travel(X/Z) | inch | 8.7/3.1/21.7 | 8.7/3.1/21.7/29.5 |
Rapid Travel(X/Z) | m/min | 36/10/36 | 36/10/36/30 |
Slide Type | - | LM | LM |
No. of Tools | EA | 12 | 12 |
Tool Size | inch | 1/1.6 | 1/1.6 |
Milling Tool Speed | r/min | 4,000 | 4,000 |
- Large output built-In spindle motor
- High productivity guaranteed by adoption of upper and lower turrets
- Highly sturdy BMT turret adopted
- Combined processing possible by the addition of Y axis to the upper turret (TTSY specifications)
- Specific cutting time reduced due to synchronous rotation control of the opposite-type main spindle
- High degree of sturdiness achieved by adopting all axis box guide (LM2500TT Series)
- Design of the hybrid-type feed shaft combining box guide and roller guide (LM1600/1800TT Series)
Description | Unit | LM1800TTS | LM1800TTMS | LM1800TTSY |
---|---|---|---|---|
Max Turning Dia | inch | 9.1 | 9.1 | 9.1 |
Max Turning Length | inch | 26.5 | 26.5 | 26.5 |
Chuck Size | inch | Main 8 | Main 8 | Main 8 |
Driving Method | - | Built in | Built in | Built in |
Spindle RPM | r/min | 5,000 | 5,000 | 5,000 |
Spindle Output | HP | 15/30 | 15/30 | 1 |
Spindle Torque | lbf.ft | 157.8/264.0 | 157.8/264.0 | 157.8/264.0 |
Travel(X/Z) | inch | 6.5/7.7/27.6/28.3/26.3 | 6.5/7.7/27.6/28.3/26.3 | 6.5/7.7/27.6/28.3/3.9 |
Rapid Travel(X/Z) | m/min | 20/20/40/40/40 | 20/20/40/40/40 | 20/20/40/40/40/7.5 |
Slide Type | - | LM | LM | LM |
No. of Tools | EA | 2 x 12 | 2 x 12 | 2 x 12 |
Tool Size | inch | 0.8/1.3 | 0.8/1.3 | 0.8/1.3 |
Milling Tool Speed | r/min | - | 5,000 | 5,000 |
- Cycle time reducing structure for maximum productivity
- Multi-tasking operation with wedge type Y-axis BMT65P turret
- Integrated processing through synchronized control of Main/Sub spindle (“S” Type)
- High performance heavy duty cutting enabled with box guideways
- Improved maintenance through locating lubrication mechanisms on the front of machine
Description | Unit | L2000Y | L2000LY | L2000SY | L2000LSY |
---|---|---|---|---|---|
Max Turning Dia | inch | 16.54 | 16.54 | 16.54 | 16.54 |
Max Turning Length | inch | 20 | 29.9 | 20.47 | 29.9 |
Chuck Size | inch | 8 | 8 | Main 8 | Main 8 |
Driving Method | - | Built in | Built in | Built in | Built in |
Spindle RPM | r/min | 5,000 | 5,000 | 5,000 | 5,000 |
Spindle Output | HP | 25/30 | 25/30 | 25/30 | 25/30 |
Spindle Torque | lbf.ft | 158/264 | 158/264 | 158/264 | 158/264 |
Travel(X/Z) | inch | 10.4/4.7/23.2 | 10.4/4.7/32.7 | 10.4/4.7/23.2/23.2 | 10.4/4.7/32.7/32.7 |
Rapid Travel(X/Z) | m/min | 30/10/30 | 30/10/30 | 30/10/30/30 | 30/10/30/30 |
Slide Type | - | BOX | BOX | BOX | BOX |
No. of Tools | EA | 12 | 12 | 12 | 12 |
Tool Size | inch | 1/2 | 1/2 | 1/2 | 1/2 |
Milling Tool Speed | r/min | 5,000 | 5,000 | 5,000 | 5,000 |
- Shortened cycle time to improve productivity.
- Adequate machine structure to produce various products.
- Adopted angular ball bearing to maintain high-rigidity and low heat absortion.
- Strengthened Equipment Sturdiness through Structural Analysis
- Applied BMT turret to cut heavy-duty products (Mill Turret Attachment Machine)
Description | Unit | L230C | L230MC |
---|---|---|---|
Max Turning Dia | inch | 14 | 12.2 |
Max Turning Length | inch | 16.6 | 13.5 |
Chuck Size | inch | 10 | 10 |
Driving Method | - | Belt | Belt |
Spindle RPM | r/min | 3,000 | 3,000 |
Spindle Output | HP | 25/20 | 25/20 |
Spindle Torque | lbf.ft | 340/275 | 340/275 |
Travel(X/Z) | inch | 8.7/17.3 | 8.7/17.3 |
Rapid Travel(X/Z) | m/min | 36/36 | 36/36 |
Slide Type | - | LM | LM |
No. of Tools | EA | 12 | 12 |
Tool Size | inch | 1/1.6 | 1/1.6 |
Milling Tool Speed | r/min | - | 5,000 |
- 45° slanted one-piece rigid bed structure
- Minimal thermal distortion
- User-friendly structure for high productivity
- Best in class rapid traverse rate : 30m/min (Z-axis)
- Reliable, high speed servo turret: 0.12sec/step
- Box guide ways for heavy-duty cutting
- Compact design, able to install within a limited space.
- Ergonomic design for convenient access to chuck and tool
Description | Unit | HD2200C | HD2200MC |
---|---|---|---|
Max Turning Dia | inch | 15 | 11.8 |
Max Turning Length | inch | 21.7 | 17.8 |
Chuck Size | inch | 10 | 10 |
Driving Method | - | Belt | Belt |
Spindle RPM | r/min | 3,500 | 3,500 |
Spindle Output | HP | 24.8/20.1 | 24.8/20.1 |
Spindle Torque | lbf.ft | 297.7/181 | 297.7/181 |
Travel(X/Z) | inch | 8.5/22.8 | 8.5/19 |
Rapid Travel(X/Z) | m/min | 24/30 | 24/30 |
Slide Type | - | BOX | BOX |
No. of Tools | EA | 12 | 12 |
Tool Size | inch | 1/1.6 | 1/1.6 |
Milling Tool Speed | r/min |
- Utilizes 140mm (5.5”) cross roller bearings and double angular contact bearings for the main spindle
- Equipped with a rigid and reliable servo turret with the best quality in its class
- Main body designed with balanced weight to achieve high rigidity and accuracy
- A powerful tailstock with thrust of 7,252 N.m
- Utilizes the highly efficient SIEMENS 828D (Option)
Description | Unit | L280 | L280L | L280LM |
---|---|---|---|---|
Max Turning Dia | inch | 16.1 | 16.1 | 11.8 |
Max Turning Length | inch | 28.3 | 42.1 | 39.4 |
Chuck Size | inch | 10 | 10 | 10 |
Driving Method | - | Belt | Belt | Belt |
Spindle RPM | r/min | 3,000 | 3,000 | 3,500 |
Spindle Output | HP | 30/25 | 30/25 | 30/25 |
Spindle Torque | lbf.ft | 538.0/452.5 | 538.0/452.5 | 363.7/305.8 |
Travel(X/Z) | inch | 8.7/29.5 | 8.7/43.3 | 8.7/40.2 |
Rapid Travel(X/Z) | m/min | 20/24 | 20/24 | 20/24 |
Slide Type | - | LM | LM | LM |
No. of Tools | EA | 10 | 10 | 12 |
Tool Size | inch | 2-Jan | 2-Jan | 2-Jan |
Milling Tool Speed | r/min | - | - | 4,000 |
- Box guideways on all axis ensuring high rigidity in heavy cutting conditions
- Highly Accurate direct drive spindle design and highly sturdy all-in-one structure
- Pretensioned double-anchored ballscrew for superior positioning and repeatability accuracy
- Minimized spindle thermal distortion
- Gearless type main spindle models are all equipped with a mill turret.
- Integrated process realized through use of optional 8 sub spindle
- Big Bore Spindle (L300C Series)
Description | Unit | L300A | L300MA | L300MSA | L300LA | L300LMA | L300LMSA |
---|---|---|---|---|---|---|---|
Max Turning Dia | inch | 19.7 | 16.1 | 16.1 | 19.7 | 16.1 | 16.1 |
Max Turning Length | inch | 28.3 | 26.8 | 26.8 | 52 | 50.4 | 49.2 |
Chuck Size | inch | 10 | 10 | Main 10 | 10 | 10 | Main 10 |
Driving Method | - | GEAR | Belt | Belt | GEAR | Belt | Belt |
Spindle RPM | r/min | 3,600 | 3,500 | 3,500 | 3,600 | 3,500 | 3,500 |
Spindle Output | HP | 30/25 | 30/25 | 30/25 | 30/25 | 30/25 | 30/25 |
Spindle Torque | lbf.ft | 557.4/468.7 | 363.7/305.9 | 363.7/305.9 | 557.4/468.7 | 363.7/305.8 | 363.7/305.8 |
Travel(X/Z) | inch | 11.4/29.5 | 11.4/29.5 | 11.4/29.5/27.6 | 11.4/53.1 | 11.4/53.1 | 11.4/53.1/47.2 |
Rapid Travel(X/Z) | m/min | 20/24 | 20/24 | 20/24/20 | 20/24 | 20/24 | 20/24/20 |
Slide Type | - | BOX | BOX | BOX | BOX | BOX | BOX |
No. of Tools | EA | 12 | 12 | 12 | 12 | 12 | 12 |
Tool Size | inch | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 |
Milling Tool Speed | r/min | - | 4,000 | 4,000 | - | 4,000 | 4,000 |
- Box guideways for heavy-duty cutting
- Stabilized unit structure to minimize thermal displacement
- User convenient structure for high productivity
- Excellent rapid traverse rate: 30m/min [1,181ipm] (Z-axis)
- High-rigidity and high-speedd servo turret (Expanded disk width)
Description | Unit | HD2600 | HD2600LE | HD2600M | HD2600LME |
---|---|---|---|---|---|
Max Turning Dia | inch | 18.1 | 19.7 | 15 | 16.5 |
Max Turning Length | inch | 25.9 | 30.7 | 24.1 | 29.1 |
Chuck Size | inch | 10 | 10 | 10 | 10 |
Driving Method | - | Belt | Belt | Belt | Belt |
Spindle RPM | r/min | 3,500 | 3,500 | 3,500 | 3,500 |
Spindle Output | HP | 34.9/24.8 | 34.9/24.8 | 34.9/24.8 | 34.9/24.8 |
Spindle Torque | lbf.ft | 541.4/385 | 541.4/385 | 541.4/385 | 541.4/385 |
Travel(X/Z) | inch | 10.4/26.8 | 10.4/32.7 | 10.4/26.8 | 10.4/32.7 |
Rapid Travel(X/Z) | m/min | 24/30 | 24/30 | 24/30 | 24/30 |
Slide Type | - | BOX | BOX | BOX | BOX |
No. of Tools | EA | 10 | 10 | 12 | 12 |
Tool Size | inch | 1/2 | 1/2 | 1/2 | 1/2 |
Milling Tool Speed | r/min |
- Rigid servo turret
- Symmetrical headstock to prevent thermal distortion
- Pretensioned double-anchored ballscrew for superior positioning and repeatability accuracy
- High-speed gantry loader for cycle time reduction
- Split bed prevents vibration transfer
Description | Unit | LF2600/ 2SP | LF2600M/2SP |
---|---|---|---|
Max Turning Dia | inch | 14.2 | 14.2 |
Max Turning Length | inch | 6.7 | 6.7 |
Chuck Size | inch | 10 | 10 |
Driving Method | - | Belt | Belt |
Spindle RPM | r/min | 3,000 | 3,000 |
Spindle Output | HP | 24.8/29.5 | 24.8/29.5 |
Spindle Torque | lbf.ft | 363.6 (Max) | 363.6 (Max) |
Travel(X/Z) | inch | 7.5/6.7 | 7.5/6.7 |
Rapid Travel(X/Z) | m/min | 24/24 | 24/24 |
Slide Type | - | BOX | BOX |
No. of Tools | EA | 2 x 10 | 2 x 10 |
Tool Size | inch | 1/1.5 | 1/1.5 |
Milling Tool Speed | r/min | - | 5,000 |
- Cross-type Y-axis spindle enables for various high accuracy processing
- Main spindle with angular ball bearing for high stiffness and low thermal emission
- Integrated processing through implementation of sub spindles (L150/200/250SY)
- VDI tool shelf for fast and convenient tool exchange.
- Front loading box guideway for heavy duty cutting (L250Y/SY)
- Improved maintenance through lubrication mechanism in the front
Description | Unit | L250Y | L250SY |
---|---|---|---|
Max Turning Dia | inch | 12.2 | 12.2 |
Max Turning Length | inch | 24.4 | 24.4 |
Chuck Size | inch | 10 | Main 10 |
Driving Method | - | Belt | Belt |
Spindle RPM | r/min | 3,500 | 3,500 |
Spindle Output | HP | 25/30 | 25/30 |
Spindle Torque | lbf.ft | 147.7/175.6 | 147.7/175.6 |
Travel(X/Z) | inch | 9.1/4.3/26.6 | 9.1/4.3/26.6/27.6 |
Rapid Travel(X/Z) | m/min | 20/10/24 | 20/10/24/20 |
Slide Type | - | BOX | BOX |
No. of Tools | EA | 12 | 12 |
Tool Size | inch | 1/1.6 | 1/1.6 |
Milling Tool Speed | r/min | 4,000 | 4,000 |
- Large output built-In spindle motor
- High productivity guaranteed by adoption of upper and lower turrets
- Highly sturdy BMT turret adopted
- Combined processing possible by the addition of Y axis to the upper turret (TTSY specifications)
- Specific cutting time reduced due to synchronous rotation control of the opposite-type main spindle
- High degree of sturdiness achieved by adopting all axis box guide (LM2500TT Series)
- Design of the hybrid-type feed shaft combining box guide and roller guide (LM1600/1800TT Series)
Description | Unit | LM2500TT | LM2500TTS | LM2500TTM | LM2500TTMS | LM2500TTSY |
---|---|---|---|---|---|---|
Max Turning Dia | inch | 15.4 | 15.4 | 15.4 | 15.4 | 15.4 |
Max Turning Length | inch | 35.4 | 35.4 | 35.4 | 35.4 | 35.4 |
Chuck Size | inch | Main 10 | Main 10 | Main 10 | Main 10 | Main 10 |
Driving Method | - | Built in | Built in | Built in | Built in | Built in |
Spindle RPM | r/min | 4,000 | 4,000 | 4,000 | 4,000 | 4,000 |
Spindle Output | HP | 20/25 | 20/25 | 20/25 | 20/25 | 20/25 |
Spindle Torque | lbf.ft | 217.5/319.3 | 217.5/319.3 | 217.5/319.3 | 217.5/319.3 | 217.5/319.3 |
Travel(X/Z) | inch | 10.6/7.5/36.2/36.2 | 10.6/7.5/36.2/36.2/36.2 | 10.6/7.5/36.2/36.2 | 10.6/7.5/36.2/36.2/36.2 | 10.6/7.5/36.2/36.2/36.2/4.7 |
Rapid Travel(X/Z) | m/min | 24/24/24/24 | 24/24/24/24/24 | 24/24/24/24 | 24/24/24/24/24 | 24/24/24/24/24/12 |
Slide Type | - | BOX | BOX | BOX | BOX | BOX |
No. of Tools | EA | 2 x 12 | 2 x 12 | 2 x 12 | 2 x 12 | 2 x 12 |
Tool Size | inch | 1-2 | 1-2 | 1-2 | 1-2 | 1-2 |
Milling Tool Speed | r/min | - | - | 4,000 | 4,000 | 4,000 |
- Cycle time reducing structure for maximum productivity
- Multi-tasking operation with wedge type Y-axis BMT65P turret
- Integrated processing through synchronized control of Main/Sub spindle (“S” Type)
- High performance heavy duty cutting enabled with box guideways
- Improved maintenance through locating lubrication mechanisms on the front of machine
Description | Unit | L2600Y | L2600SY | L2600LY |
---|---|---|---|---|
Max Turning Dia | inch | 16.54 | 16.54 | 16.54 |
Max Turning Length | inch | 29.9 | 29.9 | 50.4 |
Chuck Size | inch | 10 | Main 10 | 10 |
Driving Method | - | Built in | Built in | Built in |
Spindle RPM | r/min | 5,000 | 5,000 | 5,000 |
Spindle Output | HP | 1 | 1 | 20/30 |
Spindle Torque | lbf.ft | 302/442 | 302/442 | 302/442 |
Travel(X/Z) | inch | 10.4/4.7/23.2 | 10.4/4.7/32.7/32.7 | 10.4/4.7/53.1 |
Rapid Travel(X/Z) | m/min | 30/10/30 | 30/10/30/30 | 30/10/30 |
Slide Type | - | BOX | BOX | BOX |
No. of Tools | EA | 12 | 12 | 12 |
Tool Size | inch | 43,102 | 43,102 | 1/2 |
Milling Tool Speed | r/min | 5,000 | 5,000 | 5,000 |
- Sturdiness secured through the adoption of an all Axis box guide
- Highly accurate direct link and highly sturdy all-in-one structure
- Highly accurate pretension double-anchor method
- Minimized heat deformation in the main spindle
- Gearless type main spindle models are all equipped with a mill turret.
- Big Bore Spindle (L300C Series)
Description | Unit | L300C | L300LC | L300MC | L300LMC | L300MSC |
---|---|---|---|---|---|---|
Max Turning Dia | inch | 22 | 22 | 19.7 | 19.7 | 19.7 |
Max Turning Length | inch | 28.3 | 52 | 23.6 | 49.6 | 23.6 |
Chuck Size | inch | 12 | 12 | 12 | 12 | Main 12 |
Driving Method | - | GEAR | GEAR | Belt | Belt | Belt |
Spindle RPM | r/min | 3,000 | 3,000 | 3,000 | 3,000 | 3,000 |
Spindle Output | HP | 35/30 | 35/30 | 30/25 | 30/25 | 30/25 |
Spindle Torque | lbf.ft | 810.3/685.7 | 810.3/685.7 | 580.4/488.0 | 580.4/488.0 | 580.4/488.0 |
Travel(X/Z) | inch | 13.2/29.5 | 14/53.1 | 13.2/29.5 | 13.2/53.1 | 13.2/29.5/27.6 |
Rapid Travel(X/Z) | m/min | 20/24 | 20/24 | 20/24 | 20/24 | 20/24/20 |
Slide Type | - | BOX | BOX | BOX | BOX | BOX |
No. of Tools | EA | 12 | 12 | 12 | 12 | 12 |
Tool Size | inch | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 |
Milling Tool Speed | r/min | 4,000 | 4,000 | 4,000 |
- Sturdiness secured through the adoption of an all axis box guide
- All-in-one type structure with direct link for high accuracy and sturdiness
- Based on double anchor method for high accuracy pretension
- Minimized heat deformation in the main spindle
- Two-Step gear box drives the main spindle across the L400 range. (L400MA : Belt)
- Big Bore Spindle (L400C Series)
Description | Unit | L400A | L400MA |
---|---|---|---|
Max Turning Dia | inch | 25.2 | 22.4 |
Max Turning Length | inch | 46.5 | 46.5 |
Chuck Size | inch | 12 | 12 |
Driving Method | - | GEAR | Belt |
Spindle RPM | r/min | 3,000 | 3,000 |
Spindle Output | HP | 35/30 | 40/26.8 |
Spindle Torque | lbf.ft | 977.2/826.1 | 587.8/431.5 |
Travel(X/Z) | inch | 12.8/47.4 | 12.8/47.4 |
Rapid Travel(X/Z) | m/min | 20/25 | 20/25 |
Slide Type | - | BOX | BOX |
No. of Tools | EA | 12 | 12 |
Tool Size | inch | 1/2 | 1/2 |
Milling Tool Speed | r/min | - | 4,000 |
- Box guideways for heavy-duty cutting
- Stabilized unit structure to minimize thermal displacement
- User convenient structure for high productivity
- Excellent rapid traverse rate: 30m/min [1,181ipm] (Z-axis)
- High-rigidity and high-speedd servo turret (Expanded disk width)
Description | Unit | HD3100 | HD3100L | HD3100M | HD3100LM |
---|---|---|---|---|---|
Max Turning Dia | inch | 19.7 | 19.7 | 16.5 | 16.5 |
Max Turning Length | inch | 30.7 | 51.2 | 29.1 | 49.6 |
Chuck Size | inch | 12 | 12 | 12 | 12 |
Driving Method | - | Belt | Belt | Belt | Belt |
Spindle RPM | r/min | 2,800 | 2,800 | 2,800 | 2,800 |
Spindle Output | HP | 34.9/24.8 | 34.9/24.8 | 34.9/24.8 | 34.9/24.8 |
Spindle Torque | lbf.ft | 828.3/484.6 | 828.3/484.6 | 828.3/484.6 | 828.3/484.6 |
Travel(X/Z) | inch | 10.4/32.7 | 10.4/53.1 | 10.4/32.7 | 10.4/53.1 |
Rapid Travel(X/Z) | m/min | 24/30 | 24/30 | 24/30 | 24/30 |
Slide Type | - | BOX | BOX | BOX | BOX |
No. of Tools | EA | 10 | 10 | 12 | 12 |
Tool Size | inch | 1/2 | 1/2 | 1/2 | 1/2 |
Milling Tool Speed | r/min |
- Stable structure of the main spindle of powerful heavy cutting type (Loading & clamping structure taking advantage of the Spindle weight)
- High/Low chucking to minimize material deformation is a standard feature
- Designed for easy addition of automation and other peripheral accessories
- This phrase doesn’t make any sense even in Korean. It needs to be deleted.
- Minimal footprint for use of less shop floor space and ease of transportation
- Available in “Right” and “Left” hand configurations to minimize pitch between spindle centerlines for ease of operation and the addition of automation
Description | Unit | LV450R/ L | LV450RM/ LM | LV450G |
---|---|---|---|---|
Max Turning Dia | inch | 18.3 | 18.3 | 18.3 |
Max Turning Length | inch | 18.3 | 18.3 | 19.5 |
Chuck Size | inch | 12 | 12 | 12 |
Driving Method | - | Belt | Belt | Belt |
Spindle RPM | r/min | 3,000 | 3,000 | 3,000 |
Spindle Output | HP | 25/30 | 25/30 | 30/25 |
Spindle Torque | lbf.ft | 452.8/538.4 | 452.8/538.4 | 538.4/452.8 |
Travel(X/Z) | inch | 12.2/19.5 | 12.2/19.5 | 19.7/19.5 |
Rapid Travel(X/Z) | m/min | 20/24 | 20/24 | 24/24 |
Slide Type | - | LM | LM | LM |
No. of Tools | EA | 12 | 12 | 3 |
Tool Size | inch | 1/2 | 1/2 | 1/2 |
Milling Tool Speed | r/min | - | 4,000 |
- Cycle time reducing structure for maximum productivity
- Multi-tasking operation with wedge type Y-axis BMT65P turret
- Integrated processing through synchronized control of Main/Sub spindle (“S” Type)
- High performance heavy duty cutting enabled with box guideways
- Improved maintenance through locating lubrication mechanisms on the front of machine
Description | Unit | L3000Y | L3000SY | L3000LY |
---|---|---|---|---|
Max Turning Dia | inch | 16.54 | 16.54 | 16.54 |
Max Turning Length | inch | 29.9 | 29.9 | 50.4 |
Chuck Size | inch | 12 | Main 12 | 12 |
Driving Method | - | Built in | Built in | Built in |
Spindle RPM | r/min | 3,000 | 3,000 | 3,000 |
Spindle Output | HP | 34/50 | 34/50 | 1 |
Spindle Torque | lbf.ft | 740/931 | 740/931 | 740/931 |
Travel(X/Z) | inch | 10.4/4.7/23.2 | 10.4/4.7/32.7/32.7 | 10.4/4.7/53.1 |
Rapid Travel(X/Z) | m/min | 30/10/30 | 30/10/30/30 | 30/10/30 |
Slide Type | - | BOX | BOX | BOX |
No. of Tools | EA | 12 | 12 | 12 |
Tool Size | inch | 1/2 | 1/2 | 43,102 |
Milling Tool Speed | r/min | 5,000 | 5,000 | 5,000 |
- Box guideways on all axis ensuring high rigidity in heavy cutting conditions
- All-in-one type structure with direct link for high accuracy and sturdiness
- Pretensioned double-anchored ballscrew for superior positioning and repeatability accuracy
- Minimized spindle thermal distortion
- Two-Step gear box drives the main spindle across the L400 series. (L400MA : Belt)
- Big Bore Spindle (L400C Series)
Description | Unit | L400C | L400LC | L400MC | L400LMC |
---|---|---|---|---|---|
Max Turning Dia | inch | 24.8 | 24.8 | 22 | 22 |
Max Turning Length | inch | 46.1 | 83.5 | 46.5 | 82.7 |
Chuck Size | inch | 15 | 15 | 15 | 15 |
Driving Method | - | GEAR | GEAR | GEAR | GEAR |
Spindle RPM | r/min | 2,000 | 2,000 | 2,000 | 2,000 |
Spindle Output | HP | 35/30 | 50/40 | 50/40 | 50/40 |
Spindle Torque | lbf.ft | 1,293/1,094 | 2,266.5/1,836.5 | 2,266.5/1,836.5 | 2,266.5/1,836.5 |
Travel(X/Z) | inch | 12.8/47.4 | 12.6/86.6 | 12.6/47.2 | 12.6/86.6 |
Rapid Travel(X/Z) | m/min | 20/25 | 20/20 | 20/25 | 20/20 |
Slide Type | - | BOX | BOX | BOX | BOX |
No. of Tools | EA | 10 | 10 | 12 | 12 |
Tool Size | inch | 1.3/2 | 1.3/2 | 1.3/2.5 | 1.3/2.5 |
Milling Tool Speed | r/min | 4,000 | 4,000 |
- Stable structure of the main spindle of powerful heavy cutting type (Loading & clamping structure taking advantage of the Spindle weight)
- 2-step chuck pressure mechanism adopted to minimize material deformation
- Various peripheral equipment can be used for rational machining
- All-in-one machine structure incorporating power and oil supply functions in one body
- Space design taking into account smooth ship treatment
- “Right” and “Left” structure for the formation of rational automation
Description | Unit | LV500R/ L | LV500RM/ LM |
---|---|---|---|
Max Turning Dia | inch | 21.7 | 21.7 |
Max Turning Length | inch | 23.6 | 23.6 |
Chuck Size | inch | 15 | 15 |
Driving Method | - | Belt | Belt |
Spindle RPM | r/min | 2,000 | 2,000 |
Spindle Output | HP | 25/30 | 25/30 |
Spindle Torque | lbf.ft | 511.1/607.7 | 511.1/607.7 |
Travel(X/Z) | inch | 12.8/24.6 | 12.8/24.6 |
Rapid Travel(X/Z) | m/min | 20/18 | 1 |
Slide Type | - | LM | LM |
No. of Tools | EA | 8[12] | 8[12] |
Tool Size | inch | 1.3/2 | 1.3/2 |
Milling Tool Speed | r/min | - | 3,000 |
- Sturdiness secured through the adoption of an all Axis box guide
- All-in-one type structure with direct link for high accuracy and sturdiness
- Based on double anchor method for high accuracy pretension
- Minimized heat deformation in the main spindle
- Gear box used for the main spindle (L600/700 Series : 3 step/ L800 Series : 2 step)
- Big-bore main spindle with a maximum through diameter of Ø375 (Ø14.7) (L800D)
- Structural design featuring the major axis capable of processing a maximum length of 3,250mm (127.9) (Long Bed Type)
Description | Unit | L600A | L600MA | L600LA | L600LMA |
---|---|---|---|---|---|
Max Turning Dia | inch | 36.2 | 36.2 | 36.2 | 36.2 |
Max Turning Length | inch | 65 | 65 | 128 | 128 |
Chuck Size | inch | 18 | 18 | 18 | 18 |
Driving Method | - | GEAR | GEAR | GEAR | GEAR |
Spindle RPM | r/min | 1,800 | 1,800 | 1,800 | 1,800 |
Spindle Output | HP | 60/50 | 60/50 | 60/50 | 60/50 |
Spindle Torque | lbf.ft | 4,137.7/3,408.3 | 4,137.7/3,408.3 | 4,137.7/3,408.3 | 4,137.7/3,408.3 |
Travel(X/Z) | inch | 19.7/66.1 | 19.7/66.1 | 19.7/129.1 | 19.7/129.1 |
Rapid Travel(X/Z) | m/min | 16/12 | 16/12 | 12/12 | 12/12 |
Slide Type | - | BOX | BOX | BOX | BOX |
No. of Tools | EA | 12 | 12 | 12 | 12 |
Tool Size | inch | 1.3/3 | 1.3/3 | 1.3/3 | 1.3/3 |
Milling Tool Speed | r/min | - | 3,000 | - | 3,000 |
- Stable structure of the main spindle of powerful heavy cutting type (Loading & clamping structure taking advantage of the Spindle weight)
- 2-step chuck pressure mechanism adopted to minimize material deformation
- Various peripheral equipment can be used for rational machining
- All-in-one machine structure incorporating power and oil supply functions in one body
- Space design taking into account smooth ship treatment
- “Right” and “Left” structure for the formation of rational automation
Description | Unit | LV800R/ L | LV800RM/ LM |
---|---|---|---|
Max Turning Dia | inch | 31.5 | 31.5 |
Max Turning Length | inch | 31.5 | 31.5 |
Chuck Size | inch | 18 | 18 |
Driving Method | - | Belt | Belt |
Spindle RPM | r/min | 2,000 | 2,000 |
Spindle Output | HP | 30/40 | 30/40 |
Spindle Torque | lbf.ft | 876.2/1,194.1 | 876.2/1,194.1 |
Travel(X/Z) | inch | 17.3/31.5 | 17.3/31.5 |
Rapid Travel(X/Z) | m/min | 1 | 1 |
Slide Type | - | BOX | BOX |
No. of Tools | EA | 12 | 12 |
Tool Size | inch | 1.3/2.5 | 1.3/2.5 |
Milling Tool Speed | r/min | - | 3,000 |
- Aluminum Wheel Processing Capability up to 24 in diameter - L600AW
- Best in class work load capacity : Max. swing of 850mm (33.5) - L600AW
- Effective chip flush with standard high volume coolant shower and flush system
- Servo driven high speed turret
- Built-In Motor for use of live tools (L600AW MF- Option)
Description | Unit | L500 AW |
---|---|---|
Max Turning Dia | inch | 18.9 |
Max Turning Length | inch | 28 |
Chuck Size | inch | 17 |
Driving Method | - | Belt |
Spindle RPM | r/min | 3,000 |
Spindle Output | HP | 40/50 |
Spindle Torque | lbf.ft | 275.5/339.8 |
Travel(X/Z) | inch | 14/28.3 |
Rapid Travel(X/Z) | m/min | 20/24 |
Slide Type | - | BOX |
No. of Tools | EA | 12 |
Tool Size | inch | 1.3/2.5 |
Milling Tool Speed | r/min |
- Aluminum Wheel Processing Capability up to 24 in diameter - L600AW
- Best in class work load capacity : Max. swing of 850mm (33.5) - L600AW
- Effective chip flush with standard high volume coolant shower and flush system
- Servo driven high speed turret
- Built-In Motor for use of live tools (L600AW MF- Option)
Description | Unit | L600 AW |
---|---|---|
Max Turning Dia | inch | 18.9 |
Max Turning Length | inch | 28 |
Chuck Size | inch | 17 |
Driving Method | - | Belt |
Spindle RPM | r/min | 3,000 |
Spindle Output | HP | 40/50 |
Spindle Torque | lbf.ft | 275.5/339.8 |
Travel(X/Z) | inch | 14/28.3 |
Rapid Travel(X/Z) | m/min | 20/24 |
Slide Type | - | BOX |
No. of Tools | EA | 12 |
Tool Size | inch | 1.3/2.5 |
Milling Tool Speed | r/min |
- Box guideways on all axis ensuring high rigidity in heavy cutting conditions
- Absolute motor encoder in all axes
- Head stock designed to minimize thermal distortion
- 30° Slant Bed Structure
Description | Unit | LV800AW-TT |
---|---|---|
Max Turning Dia | inch | 25.6 |
Max Turning Length | inch | 25.6 |
Chuck Size | inch | 22.5 |
Driving Method | - | Built in |
Spindle RPM | r/min | 3,000 |
Spindle Output | HP | 73.6 |
Spindle Torque | lbf.ft | 365 |
Travel(X/Z) | inch | 16.5/25.6 |
Rapid Travel(X/Z) | m/min | 30/30 |
Slide Type | - | LM |
No. of Tools | EA | 8 |
Tool Size | inch | 1/1.6 |
Milling Tool Speed | r/min |
- Box guideways on all axis ensuring high rigidity in heavy cutting conditions
- One-piece bed structure for high accuracy and sturdiness
- Pretensioned double-anchored ballscrew for superior positioning and repeatability accuracy
- Minimized spindle thermal distortion
- Gear box used for the main spindle (L600/700 Series : 3 step/ L800 Series : 2 step)
- Big-bore main spindle with a maximum through diameter of 375 (14.7) (L800D)
- Optional Long Bed design capable of processing a maximum length of 3,250mm (127.9)
Description | Unit | L700A | L700MA | L700LA | L700LMA |
---|---|---|---|---|---|
Max Turning Dia | inch | 36.2 | 36.2 | 36.2 | 36.2 |
Max Turning Length | inch | 65 | 65 | 128 | 128 |
Chuck Size | inch | 24 | 24 | 24 | 24 |
Driving Method | - | GEAR | GEAR | GEAR | GEAR |
Spindle RPM | r/min | 1,500 | 1,500 | 1,500 | 1,500 |
Spindle Output | HP | 60/50 | 60/50 | 60/50 | 45/37 |
Spindle Torque | lbf.ft | 5,110/4,204 | 5,110/4,204 | 5,110/4,204 | 5,110/4,204 |
Travel(X/Z) | inch | 19.7/66.1 | 19.7/66.1 | 19.7/129.1 | 19.7/129.1 |
Rapid Travel(X/Z) | m/min | 16/12 | 16/12 | 12/12 | 12/12 |
Slide Type | - | BOX | BOX | BOX | BOX |
No. of Tools | EA | 12 | 12 | 12 | 12 |
Tool Size | inch | 1.3/3 | 1.3/3 | 1.3/3 | 1.3/3 |
Milling Tool Speed | r/min | - | 3,000 | - | 3,000 |
- Multi-tasking operation with wedge type Y-axis BMT85P turret
- Flat bed with rigidity increased by 25% compared to slant type bed
- 3 Step gear box type main spindle (KL8000LY : 2 step)
- Main spindle thermal displacement minimized
- Rigidity secured through box guideways on all axis
- Structure designed for machining long shafts and pipes with maximum turning length of 3,250mm (128")
Description | Unit | KL7000LY |
---|---|---|
Max Turning Dia | inch | 36.2 |
Max Turning Length | inch | 128 |
Chuck Size | inch | 24 |
Driving Method | - | Gear |
Spindle RPM | r/min | 1,500 |
Spindle Output | HP | 50/60.3 |
Spindle Torque | lbf.ft | 4,204/5,109 |
Travel(X/Z) | inch | 9.7/8.7/129 |
Rapid Travel(X/Z) | m/min | ######## |
Slide Type | - | BOX |
No. of Tools | EA | 12 |
Tool Size | inch | 1.3/3.1 |
Milling Tool Speed | r/min | 3,000 |
- Max. Wheel Size 26
- Stable structure of the main spindle of powerful heavy cutting type (Loading & clamping structure taking advantage of the Spindle weight)
- 2-step chuck pressure mechanism adopted to minimize material deformation
- Space design taking into account smooth ship treatment
- “Right” and “Left” structure for the formation of rational automation
Description | Unit | LV800RAW |
---|---|---|
Max Turning Dia | inch | 31.5 |
Max Turning Length | inch | 31.5 |
Chuck Size | inch | 25 |
Driving Method | - | Belt |
Spindle RPM | r/min | 2,000 |
Spindle Output | HP | 50/60 |
Spindle Torque | lbf.ft | 321.5/390.9 |
Travel(X/Z) | inch | 17.3/31.5 |
Rapid Travel(X/Z) | m/min | 20/20 |
Slide Type | - | BOX |
No. of Tools | EA | 12 |
Tool Size | inch | OD:1 |
Milling Tool Speed | r/min |
- Horizontal T/C for AL wheel cutting - Max cutting wheel size : 24"
- Optimized bed design for high quality AL wheel cutting (1Ton increased compare to existing model)
- Roller type LM guide with ultra wide witdth
- Powerful spindle for heavy-duty cutting (92.4N.m of Torque has increased compare to the existing model)
Description | Unit | KL6500AW |
---|---|---|
Max Turning Dia | inch | 25.9 |
Max Turning Length | inch | 28 |
Chuck Size | inch | 24 |
Driving Method | - | Belt |
Spindle RPM | r/min | 2,000 |
Spindle Output | HP | 40/50 |
Spindle Torque | lbf.ft | 407.9 |
Travel(X/Z) | inch | 15.7/28.3 |
Rapid Travel(X/Z) | m/min | 20/24 |
Slide Type | - | LM |
No. of Tools | EA | 12 |
Tool Size | inch | 1.3/2.5 |
Milling Tool Speed | r/min |
- Sturdiness secured through the adoption of an all Axis box guide
- All-in-one type structure with direct link for high accuracy and sturdiness
- Based on double anchor method for high accuracy pretension
- Minimized heat deformation in the main spindle
- Gear box used for the main spindle (L600/700 Series : 3 step/ L800 Series : 2 step)
- Big-bore main spindle with a maximum through diameter of Ø375 (Ø14.7) (L800D)
- Structural design featuring the major axis capable of processing a maximum length of 3,250mm (127.9) (Long Bed Type)
Description | Unit | L800A | L800MA | L800LA | L800LMA |
---|---|---|---|---|---|
Max Turning Dia | inch | 36.2 | 36.2 | 36.2 | 36.2 |
Max Turning Length | inch | 65 | 65 | 128 | 128 |
Chuck Size | inch | 32 | 32 | 32 | 32 |
Driving Method | - | GEAR | GEAR | GEAR | GEAR |
Spindle RPM | r/min | 700 | 700 | 700 | 700 |
Spindle Output | HP | 60/50 | 60/50 | 60/50 | 60/50 |
Spindle Torque | lbf.ft | 5,202.7/4,274.1 | 5,202.7/4,274.1 | 5,202.7/4,274.1 | 5,202.7/4,274.1 |
Travel(X/Z) | inch | 19.7/66.1 | 19.7/66.1 | 19.7/129.1 | 19.7/129.1 |
Rapid Travel(X/Z) | m/min | 16/12 | 16/12 | 12/12 | 12/12 |
Slide Type | - | BOX | BOX | BOX | BOX |
No. of Tools | EA | 12 | 12 | 12 | 12 |
Tool Size | inch | 1.3/3 | 1.3/3 | 1.3/3 | 1.3/3 |
Milling Tool Speed | r/min | - | 3,000 | - | 3,000 |
- Stable structure of the main spindle of powerful heavy cutting type (Loading & clamping structure taking advantage of the Spindle weight)
- 2-step chuck pressure mechanism adopted to minimize material deformation
- Various peripheral equipment can be used for rational machining
- All-in-one machine structure incorporating power and oil supply functions in one body
- Space design taking into account smooth ship treatment
- “Right” and “Left” structure for the formation of rational automation
Description | Unit | LV1100R/ L | LV1100RM/ LM |
---|---|---|---|
Max Turning Dia | inch | 45.7 | 45.7 |
Max Turning Length | inch | 39.4 | 39.4 |
Chuck Size | inch | 32 | 32 |
Driving Method | - | Belt | Belt |
Spindle RPM | r/min | 800 | 800 |
Spindle Output | HP | 60/80 | 60/80 |
Spindle Torque | lbf.ft | 3,916.4/4,786.7 | 3,916.4/4,786.7 |
Travel(X/Z) | inch | 24.4/39.4 | 24.4/39.4 |
Rapid Travel(X/Z) | m/min | 24/24 | 24/24 |
Slide Type | - | BOX | BOX |
No. of Tools | EA | 12 | 12 |
Tool Size | inch | 1.3/3 | 1.3/3 |
Milling Tool Speed | r/min | - | 3,000 |
- Multi-tasking operation with wedge type Y-axis BMT85P turret
- Flat bed with rigidity increased by 25% compared to slant type bed
- 3 Step gear box type main spindle (KL8000LY : 2 step)
- Main spindle thermal displacement minimized
- Rigidity secured through box guideways on all axis
- Structure designed for machining long shafts and pipes with maximum turning length of 3,250mm (128")
Description | Unit | KL8000LY |
---|---|---|
Max Turning Dia | inch | 36.2 |
Max Turning Length | inch | 128 |
Chuck Size | inch | 32 |
Driving Method | - | Gear |
Spindle RPM | r/min | 700 |
Spindle Output | HP | 50/60.3 |
Spindle Torque | lbf.ft | 4,274/5,196 |
Travel(X/Z) | inch | 9.7/8.7/129 |
Rapid Travel(X/Z) | m/min | ######## |
Slide Type | - | BOX |
No. of Tools | EA | 12 |
Tool Size | inch | 1.3/3.1 |
Milling Tool Speed | r/min | 3,000 |
- Sturdiness secured through the adoption of an all Axis box guide
- All-in-one type structure with direct link for high accuracy and sturdiness
- Based on double anchor method for high accuracy pretension
- Minimized heat deformation in the main spindle
- Gear box used for the main spindle (L600/700 Series : 3 step/ L800 Series : 2 step)
- Big-bore main spindle with a maximum through diameter of Ø375 (Ø14.7) (L800D)
- Structural design featuring the major axis capable of processing a maximum length of 3,250mm (127.9) (Long Bed Type)
Description | Unit | L800D | L800MD | L800LD | L800LMD |
---|---|---|---|---|---|
Max Turning Dia | inch | 36.2 | 36.2 | 36.2 | 36.2 |
Max Turning Length | inch | 65 | 65 | 128 | 128 |
Chuck Size | inch | 34 | 34 | 34 | 34 |
Driving Method | - | GEAR | GEAR | GEAR | GEAR |
Spindle RPM | r/min | 500 | 500 | 500 | 500 |
Spindle Output | HP | 60/50 | 60/50 | 60/50 | 60/50 |
Spindle Torque | lbf.ft | 5,375/4,419.5 | 5,375/4,419.5 | 5,375/4,419.5 | 5,375/4,419.5 |
Travel(X/Z) | inch | 19.7/66.1 | 19.7/66.1 | 19.7/129.1 | 19.7/129.1 |
Rapid Travel(X/Z) | m/min | 16/12 | 16/12 | 12/12 | 12/12 |
Slide Type | - | BOX | BOX | BOX | BOX |
No. of Tools | EA | 12 | 12 | 12 | 12 |
Tool Size | inch | 1.3/3 | 1.3/3 | 1.3/3 | 1.3/3 |
Milling Tool Speed | r/min | - | 3,000 | - | 3,000 |
- Strengthened heavy-duty cutting ability with 2-step geared drive for tables
- Main spindle designed with cross roller bearing and box guideway in all axes bring rigidity
- Highly rigid table structure for heavy load
- Hydraulic cylinder type 3-step moving crossrail structure(LV2000MM)
- Various Machining provided: Turning, tapping, milling, grinding etc.(LV2000MF/2000MM)
- Linear scale on all axes as standard
Description | Unit | LV1400 |
---|---|---|
Max Turning Dia | inch | 55.1 |
Max Turning Length | inch | 33.5 |
Chuck Size | inch | 40 |
Driving Method | - | Belt |
Spindle RPM | r/min | 492 |
Spindle Output | HP | 40/50 |
Spindle Torque | lbf.ft | 4,805/5,926 |
Travel(X/Z) | inch | -2~+32.5/31.5 |
Rapid Travel(X/Z) | m/min | 12-Dec |
Slide Type | - | BOX |
No. of Tools | EA | 12 |
Tool Size | inch | 1.3/0.8 |
Milling Tool Speed | r/min |
- Heavy-duty cutting ability with 2-step geared drive for tables
- Main spindle designed with precision angular contact bearings and box guideways in all axes for heavy duty machining applications and providing long machine life
- Highly rigid table structure for heavy load capacity
- Hydraulic cylinder type 3-step moving crossrail structure (LV2000MM)
- Variety of Machining functions possible : Turning, tapping, milling, grinding etc. (LV2000MF/2000MM)
- Linear scale on all axes are standard
Description | Unit | LV2000MM |
---|---|---|
Max Turning Dia | inch | 78.7 |
Max Turning Length | inch | 66.9 |
Chuck Size | inch | 63 |
Driving Method | - | GEAR |
Spindle RPM | r/min | 258 |
Spindle Output | HP | 40/50 |
Spindle Torque | lbf.ft | 13.213/16,297 |
Travel(X/Z) | inch | -9.8~+46.5/36 |
Rapid Travel(X/Z) | m/min | 12/12 |
Slide Type | - | BOX |
No. of Tools | EA | 18 |
Tool Size | inch | 1.3/1 |
Milling Tool Speed | r/min | 2400 |